EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #524 background imageLoading...
Page #524 background image
Configuration Parameters
521
Broadsoft Visual Voice Mail
Parameter
bw.voice_mail.visual.enable <y0000000000xx>.cfg
Description
It enables or disables the visual voice mail feature for the phone.
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
bw.voice_mail.visual.display_videomail.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the video mails in the voice mail list.
Note: It works only if "bw.xsi.enable" and "bw.voice_mail.visual.enable" are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
voice_mail.message_key.mode <y0000000000xx>.cfg
Description
It configures the phone behavior when pressing the MESSAGE key when the phone is idle.
Permitted
Values
0-enter the Set Voice Mail Code screen if the voice mail access code has not been configured; dial
out the voice mail access code if the voice mail access code has been configured.
1-enter the View Voice Mail screen
Default
0
Broadsoft SCA
Parameter
account.X.share_line.barge_in.enable
[1]
<MAC>.cfg
Description
It enables or disables the users to interrupt/barge into an active call on the shared line.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.shared_line_one_touch_bargein.en-
able
[1]
<MAC>.cfg
Description
It enables or disables the phone to barge in the call between remote shared line party and the third
party by pressing the line key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.shared_line_one_touch_retrieve.en-
able
[1]
<MAC>.cfg
Description
It enables or disables the phone to retrieve the public held call on remote shared line party phone by
pressing the line key.
Permitted
0-Disabled

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals