EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #518 background imageLoading...
Page #518 background image
Configuration Parameters
515
Default
0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Broadsoft Flexible Seating
Parameter
account.X.flexible_seating.enable
[1]
<MAC>.cfg
Description
It enables or disables the flexible seating feature.
Note: For the host, it works only if “account.X.hoteling.enable and “account.X.acd.enable” are set to 0
(Disabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.hoteling.mode
[1]
<MAC>.cfg
Description
It configures the hoteling mode.
Permitted
Values
0-Disabled
1-Hoteling
2-Flexible Seating Host
3-Flexible Seating Guest
Default
0
Parameter
account.X.hoteling.pin
[1]
<MAC>.cfg
Description
It configures the flexible seating PIN.
Permitted
Values
String
Default
Blank
Parameter
features.homescreen_softkey.hoteling.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the Flexible Seating soft keys such as GuestIn or
GuestOut on the idle screen.
Note: It works only if “account.X.flexible_seating.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
bw.flexible_seating.remember_password.ldap.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to encrypt and store the LDAP user credentials when using flexible
seating feature.
Note: It works only if "bw.enable" and “account.X.flexible_seating.enable are set to 1 (Enabled). If you
disable this feature after enabling it, all the saved user credentials are cleared.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals