EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #239 background imageLoading...
Page #239 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
236
4.
Save the change and place this file to the provisioning server.
Softkey Layout Configuration
The following table lists the parameters you can use to configure the softkey layout.
Parameter
phone_setting.custom_softkey_enable <y0000000000xx>.cfg
Description
It enables or disables the custom soft keys layout feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Softkey Layout > Custom SoftKey
Parameter
phone_setting.custom_softkey.apply_to_states <y0000000000xx>.cfg
Description
It configures the desired call state to apply the custom softkey layout.
To configure the call states to apply the custom softkey layout:
Example:
phone_setting.custom_softkey.apply_to_states = DialingEmpty,DialTransEmpty
It means that DialingEmpty and DialTransEmpty call states will use the custom softkey layout.
To configure the call states not to apply the custom softkey layout:
Example:
phone_setting.custom_softkey.apply_to_states = -DialingEmpty,DialTransEmpty
It means that DialingEmpty and DialTransEmpty call states will not use the custom softkey layout.
Note: Multiple call states are separated by commas. It works only if “phone_setting.custom_softkey_
enable” is set to 1 (Enabled).
Permitted
Values
Blank (all call states will use the custom softkey layout)
Dialing, DialingEmpty, DialTrans, DialTransEmpty, DialConference, DialConferenceEmpty, Talk,
Hold, Held, CallIn, NewCallIn, BeTransferred, SemiAttendTrans, Conferenced, ConferencedHold,
ConferencedNewCallIn, Connecting, CallFailed, Paging, ListeningPaging, RingBack, SemiAt-
tendTransBack

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals