Yealink SIP-T43U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
62
Devices
Web UI
Network > Advanced > VPN > Mode
Parameter
static.network.l2tp_server.address
[1]
<y0000000000xx>.cfg
Description
It configures the L2TP server address.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > L2TP Server Address
Parameter
static.network.l2tp_server.username
[1]
<y0000000000xx>.cfg
Description
It configures the user name of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Name
Parameter
static.network.l2tp_server.password
[1]
<y0000000000xx>.cfg
Description
It configures the password of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Password
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Example: Using VPN based on L2TP Prototol
Before you begin
You have set up the L2TP VPN server.
Procedure
1.
Set the following parameters in the configuration file and perform an auto provisioning.
#Set the VPN type to L2TP.
static.network.vpn.mode = 0
#Configure the address, user name, and password of the L2TP server.
static.network.l2tp_server.address = 192.168.10.25

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm