Yealink SIP-T43U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
411
Parameter
transfer.dsskey_deal_type <y0000000000xx>.cfg
Description
It configures the transfer mode for the DSS key. When the user presses the DSS Key during a call, the
DSS Key behavior depends on the transfer mode.
Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer key with an
assigned value.
Permitted
Values
0-New Call
1-Attended Transfer
2-Blind Transfer
4-Optional, users can choose to transfer the call via New Call, Attended Transfer or Blind Transfer
manually (not applicable to T48G/T46G/T42G/T41P/T29G phones)
Default
2
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Features > Transfer > Transfer Mode via Dsskey
Conference
The Yealink phones support local conference and network conference.
Topics
Conference Type Configuration
Local Conference Configuration
Network Conference Configuration
Conference Type Configuration
You can specify which type of conference to establish.
The following table lists the parameter you can use to set a conference type.
Parameter
account.X.conf_type
[1]
<MAC>.cfg
Description
It configures the conference type for a specific account.
Permitted
Values
0-Local Conference
2-Network Conference
Default
0
Web UI
Account > Advanced > Conference Type
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Local Conference Configuration
The local conference requires a host phone to process the audio of all parties. Yealink phones support up to 3
parties (5 parties for CP920/T42U/T43U/T53/T53W phones, 10 partes for T46U/T48U/T54W/T57W) (including your-
self) in a local conference call.
Note: Codecs that can support 10-party conference: G722, G723, G726, G729, PCMA, PCMU, and iLBC; the Opus codec can
only support 5-party conference.
The following table lists the parameters you can use to configure the local conference.

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm