Yealink SIP-T43U Administrator's Guide

Advanced Features
432
Default
60
Web UI
Features > ACD > ACD > ACD Auto Available Timer (0~120s)
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Example: Setting ACD
The following example shows the configuration for ACD.
Example
######Set an ACD for account 1#######
account.1.acd.enable = 1
account.1.acd.available = 1
account.1.subscribe_acd_expires = 3000
acd.enable = 1
acd.auto_available_timer = 60
features.homescreen_softkey.acd.enable = 1
######Set an ACD key#############
linekey.1.type=42
linekey.1.label=ACD
After provisioning, you can press the Login soft key or ACD key to log into the ACD system. After logging into the
ACD system, Available (Avail)/Unavailable (Unavail) soft key appears on the phone screen. You can press Avail-
able (Avail)/Unavailable (Unavail) soft key to change ACD state. The ACD key on the IP phone indicates the ACD
state.
Busy Lamp Field
The Busy Lamp Field (BLF) feature enables the IP phone to monitor specific remote lines for state changes on the
phone. It is not available on the T19(P) E2/CP920 IP phone.
Yealink phones support two methods of BLF configuration:
l Configure a line key as BLF key to monitor a specific remote line
l Configure BLF List to monitor a list of specific remote lines
The BLF feature enables the following functions to the users:
l Monitor the status of line on their phone
l Display caller ID information
l Answer incoming calls to the monitored line (called directed call pickup)
l Park and retrieve calls to the monitored line
l Initiate an outgoing intercom call to the monitored line
l Barging In an Active Call by BLF List Key
l Park the active call to the monitored users who are in the BLF list
Topics
BLF Key Configuration
BLF List Configuration
State Indicator of Remote Line
BLF/BLF List Subscription

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm