EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #273 background imageLoading...
Page #273 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
270
Values
Default
Blank (no prompt for entering the unlock password)
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Dsskey Page Reset Configuration
The following table lists the parameter you can use to configure reset dsskey page.
Parameter
features.dsskey_page_reset.call_estab-
lished.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to automatically switch to a specified dsskey page when a call is
established.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Parameter
features.dsskey_page_reset.call_established.page <y0000000000xx>.cfg
Description
It controls which dsskey page the phone automatically switches to when a call is established.
Note: It works only if "features.dsskey_page_reset.call_established.enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 3
Default
1
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Parameter
features.dsskey_page_reset.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically switch to a specified dsskey page when all calls end.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Parameter
features.dsskey_page_reset.page <y0000000000xx>.cfg
Description
It controls which dsskey page the phone automatically switches to when all calls end.
Note: It works only if "features.dsskey_page_reset.enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 3
Default
1
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Enhanced DSS Keys
Enhanced DSS Keys (EDK) enables users to customize the functions of the phone’s DSS keys.

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals