EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
171
Codec Packetization Time (Minimum) Packetization Time (Maximum)
opus 10ms 20ms
iLBC_15_2kpbs 20ms, 40ms, 60ms
iLBC_13_33kpbs 30ms, 60ms
PTime Configuration
The following table lists the parameter you can use to configure the PTime.
Parameter
account.X.ptime
[1]
<MAC>.cfg
Description
It configures the ptime (in milliseconds) for the codec.
Permitted
Values
0-Disabled
10-10
20-20
30-30
40-40
50-50
60-60
Default
20
Web UI
Account > Advanced > PTime (ms)
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Early Media
The early media refers to the media (for example, audio and video) played to the caller before a SIP call is actually
established.
Current implementation supports early media through the 183 message. When the caller receives a 183 message
with SDP before the call is established, a media channel is established. This channel is used to provide the early
media stream for the caller.
You can also configure 180 ring workaround which defines whether to deal with the 180 message received after
the 183 message. When the caller receives a 183 message, it suppresses any local ringback tone and begins to
play the media received. 180 ring workaround allows the phones to resume and play the local ringback tone upon
a subsequent 180 message received.
Topic
Early Media Configuration
Early Media Configuration
The following table lists the parameters you can use to configure the early media.
Parameter
phone_setting.early_media.rtp_sniffer.timeout
[1]
<y0000000000xx>.cfg

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals