EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #347 background imageLoading...
Page #347 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
344
Description
It configures the matching pattern used to identify the replaced string of the caller's phone number.
Permitted
Values
Regular Expression
Default
Blank
Related
Parameters
phone_setting.reverse_lookup.incoming_call.replace.with
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
phone_setting.reverse_lookup.incoming_call.replace.with <y0000000000xx>.cfg
Description
It configures the string used to replace the certain matched one of the caller's phone number.
Permitted
Values
String within 512 characters
Default
Blank
Related
Parameters
phone_setting.reverse_lookup.incoming_call.replace.pattern
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Example: Matching Contacts with the Caller's Phone Number Using the
Regular Expression
The following example shows the configuration for matching contacts with the caller's phone number using the reg-
ular expression.
Example:
phone_setting.reverse_lookup.contact_list.replace.pattern = 0
phone_setting.reverse_lookup.contact_list.replace.with =
phone_setting.reverse_lookup.incoming_call.replace.pattern = +49
phone_setting.reverse_lookup.incoming_call.replace.with =
After provisioning, the contact number "01781296" will be replaced with "1781296". When receiving the incoming
call from "+491781296", "+491781296" will be replaced with "1781296". Then the phone screen displays the con-
tact name and the caller's phone number.

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals