EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #417 background imageLoading...
Page #417 background image
Call Features
414
Permitted
Values
0-Disabled
1-Enabled, the recorded calls will be saved to the USB flash drive.
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
features.auto_recording.enable <y0000000000xx>.cfg
Description
It enables or disables the USB automatic recording feature.
Note: It works only if “features.usb_call_recording.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
features.idle_recording.enable <y0000000000xx>.cfg
Description
It enables or disables the USB idle recording feature.
Note: It works only if “features.usb_call_recording.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
CP920
Multicast Paging
Multicast Paging allows you to easily and quickly broadcast instant audio announcements to users who are listen-
ing to a specific multicast group on a specific channel.
Yealink phones support the following 31 channels:
l
0: Broadcasts are sent to channel 0. Note that the Yealink phones running firmware version 80 or earlier can be
regarded as listening to channel 0. It is the default channel.
l
1 to 25: Broadcasts are sent to channel 1 to 25. We recommend that you specify these channels when broad-
casting with Polycom phones which have 25 channels you can listen to.
l
26 to 30: Broadcasts are sent to channel 26 to 30.
The phones can only send and receives broadcasts to/from the listened channels. Other channels’ broadcasts will
be ignored automatically by the IP phone.
Topics
Multicast Paging Group Configuration
Multicast Listening Group Configuration
Multicast Paging Settings

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals