Yealink SIP-T43U Administrator's Guide

Phone Customization
203
Customizing the Screen Saver File
Screensaver File Elements and Attributes
The following table lists the elements and attributes you can use to add custom information in the screensaver file.
We recommend that you do not edit these elements and attributes.
Elements Attributes
Description
YealinkIPPhoneCustomScreenSaver
LineSpacing The vertical distance between different lines.
InsertImageLineNum
Specify which line to insert the image (configured by
the Image element).
Note: It is only applicable to color screen phones.
SystemTime
Size
horizontalAlign
verticalAlign
Color
Specify “show” or “hide” between <SystemTime> and
</SystemTime> to decide whether to display the time
and date.
Edit the attributes to decide how to display the time and
date, including the size, position, and color.
Note: Color is only applicable to color screen phones.
StatusIcons
horizontalAlign
verticalAlign
Specify “show” or “hide” between <StatusIcons> and
</StatusIcons> to decide whether to display the status
icons.
Edit the attributes to decide the icons displayed pos-
ition.
Line
Size
Align
Color
Specify the display text between <Line> and </Line>.
Edit the attributes to decide how to display the text,
including text size, position, and color.
Note: Color is only applicable to color screen phones.
Image
horizontalAlign
verticalAlign
height
width
Specify the display image source between <Image>
and </Image>.
Edit the attributes to decide how to display the image,
including position and size.
Note: It is only applicable to color screen phones. Ver-
ticalAlign works only if you do not configure Inser-
tImageLineNum or set the InsertImageLineNum to 0.
Customizing the Screen Saver File
1.
Open the screen saver file.
2.
Modify settings as you want.
3.
Save this file and place it to the provisioning server.
4.
Specify the access URL of the screen saver file in the configuration file.

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm