Yealink SIP-T43U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
240
Description of the Onscreen Keyboard Input Method Files
Before you customize the onscreen keyboard input method files, take a few moments to familiarize yourself with
their formats and descriptions.
File Type
File Name
(* represents any char-
acter)
Template File Description
Lang keyboard_lang.xml keyboard_lang.xml Configures the language of the keyboard.
Ime keyboard_ime_*.xml
keyboard_ime_en.xml
Configures the alternative characters for
English keyboard in alphabetic input
mode.
keyboard_ime_francais.xml
Configures the alternative characters for
French keyboard in alphabetic input
mode.
keyboard_ime_num.xml
Configures the alternative characters for
keyboard in numeric&symbolic input
mode.
Layout keyboard_layout_*.xml
keyboard_layout_1.xml
Configures the layout of English keyboard
in alphabetic input mode.
keyboard_layout_2.xml
Configures the layout of English or French
keyboard in numeric&symbolic input
mode.
keyboard_layout_fran-
cais.xml
Configures the layout of French keyboard
in alphabetic input mode.
Note: If you want to customize the existing input method files of the onscreen keyboard, you just need to upload the custom
files.
If you want to create a new language onscreen keyboard, you should upload all three types of input method files at
a time. For the example above, you should upload “keyboard_lang.xml”, “keyboard_ime_francais.xml” and “key-
board_layout_francais.xml” files at a time.
Lang File Elements and Attributes
The following table lists the elements and attributes you need to understand in the Lang file. We recommend that
you do not edit these elements and attributes.
Elements Attributes
Description
Lang Name Specify the display name of the language.
Ime Name
Specify the Ime file(s) that the language will use.
Note: One Ime file can be used by multiple languages. For example, the key-
board in numeric&symbolic input mode is almost the same for each lan-
guage, you can use the template file (keyboard_ime_num.xml) as the input
method file for multiple languages.
Customizing a Lang File
1.
Open the template file.
2.
Edit the corresponding string in the file.

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm