Yealink SIP-T43U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
514
Description
It enables or disables the hoteling feature.
Permitted
Values
0-Disabled
1-Enabled, users can use any available host (shared) phone by logging in with user credentials. After
logging in, users have access to their own guest profile on the host phone.
Default
0
Parameter
account.X.hoteling.user_id
[1]
<MAC>.cfg
Description
It configures the user ID used to log into the guest profile.
Permitted
Values
String within 99 characters
Default
Blank
Parameter
account.X.hoteling.password
[1]
<MAC>.cfg
Description
It configures the password used to log into the guest profile.
Permitted
Values
String within 99 characters
Default
Blank
Parameter
features.homescreen_softkey.hoteling.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the Hoteling soft keys such as GuestIn or GuestOut on the
idle screen.
Note: It works only if “account.X.hoteling.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
hoteling.authentication_mode <y0000000000xx>.cfg
Description
It configures the XML browser hoteling authentication mode.
Note: It works only if “account.X.hoteling.enable” is set to 1 (Enabled).
Permitted
Values
0-The phone uses the hoteling user ID and password as authentication credentials.
1-The phone uses the provisioning user name and password as authentication credentials, and at the
same time provides the hoteling user ID and password in the payload of the message for authen-
tication credentials.
Default
0
Parameter
account.X.hoteling.expires
[1]
<MAC>.cfg
Description
It configures the hoteling subscription expiration time (in seconds).
Permitted
Values
Integer from 30 to 2147483647
Default
3600
Parameter
account.X.hoteling.auto_login_enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to save login credentials automatically when logging into the guest
profile.
Permitted
Values
0-Disabled
1-Enabled

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm