EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #315 background imageLoading...
Page #315 background image
Account Settings
312
tup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
hotdesking.startup_password_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to provide an input field of password on the logon wizard after startup
when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
hotdesking.startup_sip_server_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to provide an input field of SIP server on the logon wizard after star-
tup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920
Parameter
hotdesking.startup_outbound_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to provide an input field of the outbound server on the logon wizard
after startup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920
Parameter
phone_setting.logon_wizard_forever_wait <y0000000000xx>.cfg
Description
It enables or disables the phone to remain at the hot desking logon wizard even though timeout.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals