EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #424 background imageLoading...
Page #424 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
421
You can configure a directed call pickup code and pick up the incoming call using the DPickup soft key.
Tip: You can set a DSS key as a Directed Pickup key, and specify a contact you want to pick up a call from for this key. For
more information, refer to DSS Keys.
The following table lists the parameters you can use to configure directed call pickup.
Parameter
features.pickup.direct_pickup_enable <y0000000000xx>.cfg
Description
It enables or disables the user to use DPickup soft key when performing the directed call pickup fea-
ture.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the DPickup soft key on the Dialing screen.
Default
0
Web UI
Features > Pick up & Park > Directed Call Pickup
Parameter
features.pickup.direct_pickup_code <y0000000000xx>.cfg
Description
It configures the directed call pickup code on a phone basis.
Note: The code configured by "account.X.direct_pickup_code takes precedence over that configured
by this parameter.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Pick up & Park > Directed Call Pickup Code
Parameter
account.X.direct_pickup_code
[1]
<MAC>.cfg
Description
It configures the directed call pickup code.
Note: The code configured by this parameter takes precedence over that configured by “fea-
tures.pickup.direct_pickup_code”.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Account > Advanced > Directed Call Pickup Code
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals