EasyManuals Logo

Yealink SIP-T43U Administrator's Guide

Yealink SIP-T43U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #487 background imageLoading...
Page #487 background image
Advanced Features
484
Values 1-Enabled
Default
0
Parameter
account.X.sub_fail_retry_interval
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) for the phone to retry to re-subscribe when subscription fails.
Permitted
Values
Integer from 0 to 3600
Default
30
Parameter
account.X.subscribe_mwi_to_vm
[1]
<MAC>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber.
Note: It works only if “account.X.subscribe_mwi is set to 1 (Enabled) and “voice_mail.number.X” is
configured.
Permitted
Values
0-Disabled, the phone will subscribe to the message waiting indicator to a specific account.
1-Enabled
Default
0
Web UI
Account > Advanced > Subscribe MWI to Voice Mail
Parameter
voice_mail.number.X
[1]
<MAC>.cfg
Description
It configures the voice mail number.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Account > Advanced > Voice Mail
Phone UI
Menu > Message > Voice Mail > Set Voice Mail Code
Parameter
account.X.display_mwi.enable
[1]
<MAC>.cfg
Description
It enables or disables the MWI alert to indicate that you have an unread voice mail message.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Account > Advanced > Voice Mail Display
Parameter
features.voice_mail_alert.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when receiving the same amount of new
voicemails.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
features.voice_mail_key_lamp_field.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber when configuring a Voice Mail dsskey.

Table of Contents

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals