Yealink SIP-T43U Administrator's Guide

Configuration Parameters
525
Time interval ranges from 1 to 20 (in seconds).
For example :
account.1.acd.call_information = 806<1 > 1005<2 > 1234
The phone will dial out the call center number 806, wait for 1s, automatically enter the user ID 1005,
wait for 2s, automatically enter the password 1234 when you press the In/Out (LogIn/Out) soft key on
the phone.
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star).
Permitted
Values
String
Default
Blank
Parameter
account.X.acd.refresh_url
[1]
<MAC>.cfg
Description
It configures the URL the phone sends when the ACD agent logs into/logs out of the ACD system, or
refreshes the status (you press the In/Out (LogIn/Out) or Refresh soft key on the phone).
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star).
Permitted
Values
String
Default
Blank
Parameter
account.X.acd.away_url
[1]
<MAC>.cfg
Description
It configures the URL the phone sends when the ACD agent changes the status to away (you press
the Away soft key on the phone).
For example :
account.1.acd.away_url= http://portal-dev.star2star.com:8181/yealink/reason_code_respon-
se?reason_code=#REASONCODE&agent_extension=ext_843 85&agent_location= starbox_628&a-
gent_phone=94&customer_id=435s
#REASONCODE will be automatically replaced with the away code you entered when the URL is
sent to the server.
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star) and “accoun-
t.X.acd.unavailable_reason_enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Parameter
account.X.acd.available_url
[1]
<MAC>.cfg
Description
It configures the URL the phone sends when the ACD agent changes the status to available (you
press the Avail soft key on the phone).
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star).
Permitted
Values
String
Default
Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm