Yealink SIP-T43U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
50
Network > Wi-Fi > IPv6 Config > Configuration Type (Static IP) > IP Address
Other Phones:
Network > Wi-Fi > IPv6 Config > Static IP Address > IP Address
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > IPv6 > Static IP > IP Address
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IPv6 >
Static IPv6 Client > IP Address
Parameter
static.network.wifi.ipv6_prefix
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 prefix for the wireless network.
Note: It works only if “static.network.wifi.ip_address_mode” is set to 1 (IPv6) or 2 (IPv4 & IPv6), and
"static.network.wifi.ipv6_internet_port.type" is set to 1 (Static IP).
Permitted
Values
Integer from 1 to 128
Default
64
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Network > Wi-Fi > IPv6 Config > Configuration Type (Static IP) > IPv6 Prefix(0~128)
Other Phones:
Network > Wi-Fi > IPv6 Config > Static IP Address > IPv6 Prefix(0~128)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > IPv6 > Static IP > IPv6 IP Prefix
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IPv6 >
Static IPv6 Client > IPv6 IP Prefix
Parameter
static.network.wifi.ipv6_internet_port.gateway
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 default gateway for the wireless network.
Note: It works only if “static.network.wifi.ip_address_mode” is set to 1 (IPv6) or 2 (IPv4 & IPv6), and
"static.network.wifi.ipv6_internet_port.type" is set to 1 (Static IP).
Permitted
Values
IPv6 Address
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Network > Wi-Fi > IPv6 Config > Configuration Type (Static IP) > Default Gateway
Other Phones:
Network > Wi-Fi > IPv6 Config > Static IP Address > Default Gateway
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > IPv6 > Static IP > Default Gate-
way

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm