Yealink SIP-T43U Administrator's Guide

Phone Provisioning
88
Note: If the phone performs auto provisioning when receiving a SIP NOTIFY message which contains
the header “Event: check-sync”, the phone will display the prompt message no matter whether the con-
figuration is updated.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
static.auto_provision.connect.keep_alive <y0000000000xx>.cfg
Description
It enables or disables the long connection for downloading files via auto provisioning.
Permitted
Values
0-Disabled, the phone uses the short connection for downloading files via auto provisioning
1-Enabled
Default
0
Parameter
static.auto_provision.authentication.expired_time <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) after which the authentication pop-up box for auto provisioning
disappears.
Permitted
Values
0-The authentication pop-up box does not disappear from the phone screen automatically.
Integer from 10 to 86400 -The authentication pop-up box automatically disappears from the phone
screen after the designated time.
Default
7200
Parameter
static.auto_provision.dns_resolv_nosys <y0000000000xx>.cfg
Description
It enables or disables the phone to resolve the access URL of the provisioning server using download
libraries mechanism.
Permitted
Values
0-Disabled, the phone resolves the access URL of the provisioning server using the system mech-
anism.
1-Enabled
Default
1
Supported
Devices
T42G, T41P, CP920
Parameter
static.auto_provision.dns_resolv_nretry <y0000000000xx>.cfg
Description
It configures the retry times when the phone fails to resolve the access URL of the provisioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to
1 (Enabled).
Permitted
Values
Integer from 1 to 10
Default
2
Parameter
static.auto_provision.dns_resolv_timeout <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) for the phone to retry to resolve the access URL of the pro-
visioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to
1 (Enabled).
Permitted
Values
Integer from 1 to 60
Default
5

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm