Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
90
3. Click Confirm to accept the change.
To configure H.460 firewall traversal via the remote control:
1. Select Menu->Advanced (default password: 0000) ->H.323.
2. Check the H.460 checkbox.
3. Press the Save soft key to accept the change.
The video conferencing endpoint can provide efficiency and continuous communication
for both the head office and a branch office.
In some cases, the head office is in the WAN and lacks a VPN network, while the branch
office is the LAN, and no port mapping is configured on its firewall. You can enable the
intelligent firewall traversal feature, so that the head office can share content with
branch office, or control the camera of branch office.
The intelligent firewall traversal parameter is described below:
Intelligent Firewall
Traversal
Enables or disables the
intelligent firewall traversal
feature on the endpoint.
Default: Disabled
To Next Page
Loading...
