Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
66
reboot to make the change take
effect.
To configure DHCP VLAN discovery via the web user interface:
1. Click on Network->Advanced.
2. In the VLAN block, select the desired value from the pull-down list of DHCP VLAN
Active.
3. Enter the desired option in the Option field.
The default option is 132.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5. Click Confirm to reboot the endpoint immediately.
IEEE 802.1X authentication is an IEEE standard for Port-based Network Access Control
(PNAC), part of the IEEE 802.1 group of networking protocols. It offers an authentication
mechanism for devices to connect to a LAN or WLAN. The 802.1X authentication involves
three parties: a supplicant, an authenticator and an authentication server. The
supplicant is the endpoint that wishes to attach to the LAN or WLAN. With 802.1X
port-based authentication, the endpoint provides credentials, such as user name and
To Next Page
Loading...
