Configuring Call Preferences
99
This chapter provides information on how to configure endpoint‘s call preferences (e.g.,
call type and network bandwidth).
This chapter provides the following sections:
Configuring SIP Settings
Configuring H.323 Settings
DTMF
Codecs
Call Type
Do Not Disturb
Auto Answer
History Record
Call Match
Bandwidth
Video Size Mode
Ringback Timeout
Auto Refuse Timeout
Yealink VC110 video conferencing endpoint supports Session Initiation Protocol (SIP). If
your server supports SIP, you can use SIP to establish calls.
To establish calls using SIP, you can configure a SIP account for the endpoint.
SIP account parameters on the endpoint are described below:
Enables or disables the SIP
protocol.
Default: Enabled.
Note: only when it is set to
enabled, can SIP account be
Remote Control
Web User Interface
To Next Page
Loading...
