Endpoint Maintenance
193
This chapter provides basic endpoint maintenance, including upgrading firmware,
managing configurations, resetting endpoints and how to monitor network via SNMP.
Topics include:
Upgrading Firmware
Importing/Exporting Configuration
Resetting to Factory
SNMP
The newly released firmware version may add new features. Because of this, Yealink
recommends you to update the latest firmware. You can upgrade the endpoint
firmware via the web user interface. The firmware name of the VC110 video
conferencing endpoint is: 50.x.x.x.rom (x is the actual firmware version). You can
download the latest firmware version from the Yealink website.
To upgrade firmware via the web user interface:
1. Click on Setting->Upgrade.
2. Click Browse to locate the firmware from your local endpoint.
3. Click Upgrade to upgrade the firmware.
The browser pops up the dialog box ―Firmware of the video conference endpoint
will be updated. It will take 5 minutes to complete. Please don't power off!‖.
To Next Page
Loading...
