Configuring Call Preferences
119
The history record parameter on the endpoint is described below:
Enables or disables the history
record feature on the endpoint.
Default: Enabled
Remote Control
Web User Interface
To configure history record via the web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of History Record.
3. Click Confirm to accept the change.
To configure history record via the remote control:
1. Select Menu->Call Features.
2. Check the History Record checkbox.
3. Press the Save soft key to accept the change.
The endpoint automatically detects the available bandwidth for call connection by
default. The VC110 supports connecting to other devices with different bandwidth. If a
device with lower bandwidth joins a call, the video quality will stay the same or will not
reduce a lot. You can specify the uplink and downlink bandwidths for the endpoint to
achieve the best result. Uplink bandwidth is the max bandwidth of outgoing calls. And
downlink bandwidth is the max bandwidth of incoming calls. The configurable
To Next Page
Loading...
