Yealink VC110 - LED Instructions

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
12
There is a power switch on its bottom. You can turn off this switch if the VCM60 is not in
use for a long period of time.
Name
Description
①
Battery Indicator LED
Indicates the battery information. For more
information on the mute indicator LED, refer to LED
Instructions on page 31.
②
Built-in Microphone
Supports 360-degree audio pickup at a radius of up to
2 meters.
③
Mute Button
 Mutes or unmutes the VCM60. For more
information on the mute indicator LED, refer to
LED Instructions on page 31.
 Activates the VCM60 to search the dongle when
it is in the offline standby mode. For more
information, refer to Standby Mode on page 31.
 Enters registration mode. For more information,
refer to Registering and Unregistering the VCM60
on page 17.
④
Charging Interface
Connects the VCM60 to a power adapter or a
computer's USB port using a USB cable to charge the
VCM60.
⑤
Switch
Turns on or off the VCM60.
The VCM60 has a rubber pads on its base to prevent it from sliding. You can place the
VCM60 on a conference table. Do the following to ensure optimal voice quality:
 For registering to the dongle successfully, make sure the VCM60 video
conferencing wireless microphone is less than 30 meters distant from the dongle.