VC110 Video Conferencing Endpoint Introduction
13
Place the VCM60 on a stable surface and keep it away from obstacles so that it
can effectively pick up sounds.
There is a power switch on the bottom of the VCM60. Turn on the power switch to start
the VCM60. After the VCM60 starts, it registers with the paired dongle automatically.
You can turn off this switch if the VCM60 is not in use for a long period of time.
To ensure good voice quality, VCM60 video conferencing wireless microphone can be
connected to the VC110 video conferencing endpoint to work as the audio input device.
To connect the VCM60 to the VC110 video conferencing endpoint, do the following:
1. Connect the dongle to one of the USB ports on the VC110 all-in-one unit.
To Next Page
Loading...
