Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
14
The display device prompts ―Dongle connected!‖, and the (unregistered)
icon appears on the status bar.
2. Turn on the VCM60.
The VCM60 registers with the dongle automatically. If successful, the
(unregistered) icon will change to (registered). Current capacity appears on
the right side of the icon. When the standby time is less than 1 hour, please
charge the VCM60. For more information, refer to Charging the VCM60 on page 19.
To Next Page
Loading...
