Yealink VC110 - Endpoint Maintenance

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
138
To configure the key tone via the web user interface:
1. Click on Setting->General.
2. Select the desired value from the pull-down list of Key Tone.
3. Click Confirm to accept the change.
To configure the key tone via the remote control:
1. Select Menu->Basic.
2. Mark the radio box in the Key Tone field.
3. Press the Save soft key to accept the change.
The endpoint supports the following audio output devices:
 Auto
 VCS Phone
 HDMI
 Line Output
By default, the endpoint automatically selects the audio output devices with highest
priority. The priority is: VCS Phone> HDMI>Line Output. If the audio output device with
highest priority is removed from the VC110, the VC110 will select the next highest priority
device.
You can also specify the desired audio output device via the remote control or the web
user interface.