Yealink VC110 - Display Issues; Video & Audio Issues

Configuring Endpoint Settings
137
To configure the relog offtime via the web user interface:
1. Click on Setting->General.
2. Enter the desired time in the ReLogOffTime field.
3. Click Confirm to accept the change.
You can enable the key tone feature for the endpoint to make a keyboard click sound
effect (key tone) when pressing a key on the remote control. If you disable this feature
or endpoint ringer volume is adjusted to 0, the endpoint will not play a key tone when you
press the key on the remote control.
Key tone is configurable via the remote control or web user interface.
The key tone parameter is described below:
Parameter
Description
Configuration Method
Key Tone
Enables or disables the key tone.
Default: On
Remote Control
Web User Interface