Configuring Endpoint Settings
127
the VCP40 phone.
Default: Always On
To configure the backlight time of the VCP40 phone via the web user interface:
1. Click on Setting->General.
2. Select the desired value from the pull-down list of Backlight Time.
3. Click Confirm to accept the change.
The default language of the LCD screen of the display device and the VCP40 is English,
and you can change it via the remote control. The VCP40 phone will detect and use the
same language as the display device.
The default language of the web user interface is English. You can change the language
of the web user interface via the web user interface. The available languages for
endpoint are English, Chinese Simplified, Chinese Traditional, French, German, Italian,
Polish, Portuguese, Spanish, Turkish and Russian.
The language parameters on the endpoint are described below:
Specifies the language for the
web user interface
Specifies the language for the
LCD screen of the display device
and the VCP40 phone.
Default: English
To Next Page
Loading...
