Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
126
To configure the site name via the web user interface:
1. Click on Setting->General.
2. Edit the site name in the Site Name field.
3. Click Confirm to accept the change.
The LCD screen of the display device and VCP40 will display the changed site
name.
To configure the site name via the remote control:
1. Select Menu->Basic.
2. Edit the site name in the Site Name field.
3. Press the Save soft key to accept the change.
The LCD screen of the display device and VCP40 will display the changed site
name.
Backlight determines the brightness of the LCD screen display, allowing users to read
easily in dark environments. Backlight time specifies the delay time to turn off the
backlight when the phone is inactive.
You can configure the backlight time as one of the following types:
Always On: Backlight is turned on permanently.
15 s, 30 s, 10 min, 20 min, 30 min, 1 Hour, 2 Hour, 3 Hour, 4 Hour: Backlight is turned
off when the phone is inactive after a preset period of time. It is automatically
turned on if the status of the phone changes or any key is pressed.
The backlight parameter on VCP40 phone is described below:
Configures the backlight time of
To Next Page
Loading...
