Yealink VC110 - Getting Started; Endpoint Connection and Installation

VC110 Video Conferencing Endpoint Introduction
17
To view the VCM60 information via web user interface:
1. Click on Status.
To view the VCM60 information via the remote control:
1. Select Menu->Status->Wireless Micpod.
The VCM60 video conferencing wireless microphone and dongle are
automatically ‖paired‖ at the factory. But In following cases, you may need to
deregister or register the VCM60 video conferencing wireless microphone manually.
 The device is broken, new VCM60 or new dongle need to be re-paired.
 VCM60 and dongle need to be paired during the production.
You can only register and unregister the VCM60 via the web user interface. The web
user interface will display the model and product ID of the dongle and video
conferencing wireless microphone.