Yealink VC110 - Page 110

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
100
Parameter
Description
Configuration Method
registered.
SIP Active
Enables or disables the SIP
account.
Default: Enabled
Remote Control
Web User Interface
Register Name
Configures the user name of the
SIP account for register
authentication.
Default: Blank
Remote Control
Web User Interface
User Name
Specifies the user name to use for
authentication when registering
with a SIP server.
Default: Blank
Remote Control
Web User Interface
Password
Specifies the password
associated with the user name
used to authenticate the
endpoint to the SIP server.
Default: Blank
Remote Control
Web User Interface
Server Host
Configures the IP address or
domain name of the SIP server
for the SIP account.
Default: Blank
Remote Control
Web User Interface
Enable Outbound
Proxy Server
Enables or disables the endpoint
to send requests of the SIP
account to the outbound proxy
server.
Default: Disabled
Remote Control
Web User Interface
Outbound Proxy
Server
Configures the IP address or
domain name of the outbound
proxy server for the SIP account.
Valid values: Integer from 1 to
65535.
Default: it is configurable only
when the Outbound Proxy Server
is enabled.
Remote Control
Web User Interface
Transport
Configures the type of transport
protocol for the SIP account.
 UDP—provides best-effort
Remote Control
Web User Interface