Yealink VC110 - Page 103

Configuring Network
93
QoS feature parameters on the endpoint are described below.
Parameter
Description
Configuration Method
Audio Priority
Specifies the DSCP value for
voice packets.
Valid Values: 0-63
Default: 63
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Remote Control
Web User Interface
Video Priority
Specifies the DSCP value for
video packets.
Valid Values: 0-63
Default: 34
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Remote Control
Web User Interface
Data Priority
Specifies the DSCP value for data
packets.
Valid Values: 0-63
Default: 63
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Remote Control
Web User Interface