Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
96
compressed package of
VPN-related files to the endpoint
first before enabling the VPN
feature. If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Uploads the compressed
package of VPN-related files
(*.tar) to the endpoint.
To configure VPN via the web user interface:
1. Click on Network->Advanced.
2. In the VPN block, click Browse to locate the VPN file (*.tar) from your local endpoint.
3. Click Upload to upload the file to the endpoint.
4. Select the desired value from the pull-down list of Active.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
To Next Page
Loading...
