Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
102
To configure SIP account via the web user interface:
1. Click on Account->SIP Account.
2. Configure the SIP account settings.
3. Click Confirm to accept the change.
After successful registration, the display device displays , and the LCD
screen of the VCP40 phone displays .
To configure SIP account via the remote control:
1. Select Menu->Advanced (default password: 0000) ->SIP Account.
2. Configure the SIP account settings.
3. Press the Save soft key to accept the change.
After successful registration, the display device displays , and the LCD
screen of the VCP40 phone displays .
When making an IP call using the SIP protocol, the endpoint doesn't support the TLS
protocol. So configuration parameters of SIP direct account are divided from the SIP
account. You can configure SIP direct account separately.
SIP direct account parameters on the endpoint are described below:
To Next Page
Loading...
