Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
104
To configure SIP direct account via the web user interface:
1. Click on Account->SIP Account.
2. Select Enabled from the pull-down list of SIP Protocol.
3. Click SIP Direct Account.
4. Select the desired value from the pull-down list of Transport.
4. Click Confirm to accept the change.
To configure SIP direct account via the remote control:
1. Select Menu->Advanced (default password: 0000) ->SIP Account.
2. Mark the On radio box in the SIP Protocol field.
3. Press the Save soft key to accept the change.
4. Press the Back soft key to return to the Advanced menu.
To Next Page
Loading...
