Yealink VC110 - Using the VCM60 Video Conferencing Wireless Microphone; Placing the VCM60

Configuring Call Preferences
115
To configure DND via the web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of DND.
3. Click Confirm to accept the change.
If Enabled is selected, the display device will display , and the LCD screen of
the VCP40 phone will display .
To configure DND via the remote control:
1. Select Menu->Call Features ->Call Type.
2. Check the DND checkbox.
3. Press the Save soft key to accept the change.
The display device will display , and the LCD screen of the VCP40 phone will
display .
To configure DND during a call via the web user interface:
1. Click Home.
2. Check the DND checkbox.
The display device will display , and the LCD screen of the VCP40 phone will
display .
To configure DND during a call via the remote control:
1. Press the More soft key.
2. Check the DND checkbox.
3. Press the Back soft key to exit the More window.