Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
122
No matter what device the other
party is, the endpoint will send
and receive 1080p30 video
forcibly.
Note：If it is selected, the
endpoint cannot share content
during a call with non-Yealink
device.
Remote Control
Web User Interface
No matter what device the other
party is, the endpoint will send
and receive 720p30 video
forcibly.
Remote Control
Web User Interface
Yealink VC110 can adjust the video resolution automatically. When the video stream
(For example: sharing content or recording) increases, the video resolution will
decrease automatically. When the video stream decreases, the video resolution will
increase automatically.
To configure video size mode via the web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Video Size Mode.
3. Click Confirm to accept the change.
To Next Page
Loading...
