Yealink VC110 - Page 167

Configuring Endpoint Settings
157
Parameter
Description
Configuration Method
Default: Blank
Note: It only works if the
parameter ―Select Country‖ is set
to Custom.
Auto Answer
Customizes the auto answer tone
for the endpoint.
For more information on how to
customize the tone, refer to the
parameter ―Ring Back‖.
Default: Blank
Note: It only works if the
parameter ―Select Country‖ is set
to Custom.
Web User Interface
To configure tones via the web user interface:
1. Click on Setting->Tones.
2. Select the desired value from the pull-down list of Select Country.
If you select Custom, you can customize the tone for indicating each condition of
the endpoint.
3. Click Confirm to accept the change.