Yealink VC110 - Page 174

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
164
LADP parameters are described below:
Parameter
Description
Configuration Method
LDAP Enable
Enables or disables the LDAP
feature on the endpoint.
Default: Disabled
Web User Interface
LDAP Name Filter
Configures the name attribute for
LDAP searching.
Example:
(|(cn=%)(sn=%))
Web User Interface
LDAP Number
Filter
Configures the number attribute
for LDAP searching.
Example:
(|(telephoneNumber=%)(mobile
=%))
Web User Interface
LDAP Server
Address
Configures the domain name or
IP address of the LDAP server.
Web User Interface
Port
Configures the LDAP server port.
Default: 389
Web User Interface
LDAP User Name
Configures the user name used to
log into the LDAP server.
Note: The user name is provided
by the server administrator. If the
LDAP server allows ‗anonymous‘
to login, you don‘t need to
provide the user name to access
the LDAP server.
Web User Interface
LDAP Password
Configures the password to log
into the LDAP server.
Note: The password is provided
by the server administrator. If the
LDAP server allows ‗anonymous‘
to login, you don‘t need to
provide the user password to
access the LDAP server.
Web User Interface
LDAP Base
Configures the root path of the
LDAP search base.
Example:
Web User Interface