Yealink VC110 - Page 191

Configuring Security Features
181
Parameter
Description
Configuration Method
certificates list. Only when the
authentication succeeds, will the
endpoint trust the server.
If you change this parameter, the
endpoint will reboot to make the
change take effect.
Common Name
Validation
Enables or disables the endpoint
to mandatorily validate the
CommonName or
SubjectAltName of the certificate
sent by the server.
Default: Disabled
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Web User Interface
CA Certificates
Configures the type of certificates
in the Trusted Certificates list for
the endpoint to authenticate for
the TLS connection.
 Default Certificates
 Custom Certificates
 All Certificates
Default: Default Certificates
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Web User Interface
Upload Trusted
Certificate File
Upload the custom CA certificate
to the endpoint.
Note: A maximum of 10 CA
certificates can be uploaded to
the endpoint. The certificate you
want to upload must be in *.pem,
*.crt, *.cer or *.der format.
Web User Interface
Device
Certificates
Upload the customized CA
certificate to the endpoint.
 Default Certificates
Web User Interface