Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
184
To upload a CA certificate via the web user interface:
1. Click on Security->Trusted Certs.
2. Click Browse to locate the certificate (*.pem,*.crt, *.cer or *.der) from your local
endpoint.
3. Click Upload to upload the certificate.
To configure the device certificate via the web user interface:
1. Click on Security->Server Certs.
2. Select the desired value from the pull-down list of Device Certificates.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4. Click Confirm to reboot the endpoint immediately.
To Next Page
Loading...
