Yealink VC110 - Page 201

Configuring Security Features
191
3. Click Confirm to accept the change.
You can configure safe mode call feature to handle abnormal H.323 calls.
The safe mode call parameters on the endpoint are described below:
Parameter
Description
Configuration Method
Safe mode call
Enables or disables the safe
mode call feature for H.323
incoming call from public
network.
 Disabled—do not use safe
mode call.
 Enabled—use safe mode
call.
Default: Disabled
Note: If it is enabled, the
endpoint will reject H.323
incoming call from public
network. If it is disabled, any
H.323 incoming call from public
network can be accepted.
Web User Interface