Endpoint Maintenance
197
For example, Yealink VCS.
1.3.6.1.2.1.37459.2.1.
3.0
The physical location of the endpoint.
For example, Server Room
1.3.6.1.2.1.37459.2.1.
4.0
The time (in milliseconds) since the
network management portion of the
endpoint was last re-initialized.
1.3.6.1.2.1.37459.2.1.
5.0
The firmware version of the endpoint.
1.3.6.1.2.1.37459.2.1.
6.0
The hardware version of the endpoint.
1.3.6.1.2.1.37459.2.1.
7.0
1.3.6.1.2.1.37459.2.1.
8.0
The MAC address of the endpoint.
1.3.6.1.2.1.37459.2.1.
9.0
The IP address of the endpoint.
1.3.6.1.2.1.37459.2.1.
10.0
The target version to which the current
version is updated automatically.
Format:
MacVersion[*]ComVersion[*]
For example,
MacVersion[0.0.0.1]ComVersion[0.0.0.1]
1.3.6.1.2.1.37459.2.1.
11.0
The command of the endpoint reboot.
Format:
snmpset -v 2c XXXX public 37459.2.1.11.0
s reboot
XXXX refers to the IP address of the
endpoint.
SNMP parameters on the endpoint are described below:
Enables or disables SNMP
feature on the endpoint.
Default: Disabled
Note: If you change this
parameter, the endpoint will
To Next Page
Loading...
