Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
202
Server-export the endpoint
log to the specified server.
Default: Local
Specify the server address where
the log will be exported.
Note: It only works if the
parameter ―Export System Log‖
is set to Server.
Specify the endpoint log level.
Note: The supported level is 0-9.
Higher value indicates more
detailed content.
Default: 9
To configure the endpoint log level via the web user interface:
1. Click on Setting->Configuration.
2. Select the desired level from the pull-down list of Endpoint System Level.
3. Click Confirm to accept the change.
To Next Page
Loading...
