Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
204
3.
Enter the IP address or domain name of the syslog server in the Server Name field.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click Confirm to reboot the endpoint immediately.
The administrator can capture packets in two ways: capturing the packets via the web
user interface or using the Ethernet software. Engineers can analyze the packets to
troubleshoot problems.
Packets parameters are described below:
Start and stop capturing packets or
export the captured packets.
Configures the count of the number
of packets to capture.
Default: 5
Packet Capture
Clip Bytes
Configures the number of bytes (in
kb) of the packet to capture.
Default: 1024
Configures the filter type of the
packet to capture.
Valid Values:
Custom—Customize the
To Next Page
Loading...
