Yealink VC110 - Page 35

VC110 Video Conferencing Endpoint Introduction
25
There is a mute button at the top of the VCM30. You can mute or unmute it in the
following scenarios:
 If you do not want to have your voice broadcast during a conference, you can tap
the mute button to mute the VCM30.
 If you want to speak again during a conference, you can tap mute button to
unmute the VCM30.
To mute the VCM30 during a call:
1. Tap to mute the call.
The mute indicator LED illuminates solid red. And the mute icon appears on
the local video image.
To un-mute the VCM30 during a call:
1. Tap again to un-mute the call.
The mute indicator LED illuminates solid green. And the mute icon disappears
from the local video image.
When the VCM30 is connected to the Audio In port of cable hub, you can view VCM30
status via the remote control or web user interface.
Available information of VCM30 includes:
 Status
 Model
 Hardware Version
 Serial Number