Yealink VC110 - Page 48

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
38
a) Mounting the VC110 all-in-one unit on a TV
When the thickness of your TV is between 35-120 mm, you can mount the VC110
all-in-one unit on your TV.
Do the following:
1. Lock the VC110 all-in-one unit to the L-bracket.
2. Remove the protection of the Velcro.
3. Put the L-bracket on the top of the TV.
4. Adjust the L-bracket to ensure close adhesion to the back of the TV.
b) Mounting the VC110 all-in-one unit on a wall
You can also mount the VC110 all-in-one unit on a wall. The recommended height for
VC110 all-in-one unit positioning is 1.5m-1.8m above the ground.
Do the following:
1. Punch holes into the wall and then insert the expansion bolts.
Installation location for the expansion bolts and punching requirement are shown
above.
2. Lock the L-bracket with the M3× 8 screws.
3. Move the setscrews on the L-bracket to the left holes.
4. Lock the L-bracket to the wall with T4× 30 screws.