Getting Started
45
The default site name is ‖Yealink VC110‖.
6. Press (Next soft key) to continue or press (Previous soft key) to return
to the previous screen.
7. Change the administrator password.
The default administrator password is ―0000‖. For security reasons, the
administrator should change the default administrator password as soon as
possible.
Note
Do remember the new administrator password or keep a copy of the password in a safe
place. If you forget the password, you will need to reset the endpoint to the factory
settings, and then reset the password or use the default password‖0000‖.
For more information, refer to Resetting to Factory on page 194.
To Next Page
Loading...
